SBC - Raspberry Pi HS
In electronics applications, a heat sink is a heat exchanger that transfers the heat generated by an electronic device to an attached material made with aluminium or copper from where it is dissipated away from the device, thereby allowing regulation of the device's temperature. It helps the electronic component to improve its performance and extend its life.
A heat sink sometimes incorporates a fan or other mechanism to reduce the temperature of a electronic hardware component, such as a processor or a high power transistor.
Basically heat sinks are of two types.
1. Passive Heat Sinks
2. Active Heat Sinks
In this category we have listed heat sinks suitable for various components on SBC - Single-Board Computers such as Raspberry Pi.
Aluminium + Copper Heat Sink Set For Raspberry Pi 4/3/2 - G-RPI-4-3-2-P-2-G
This kit contains a set of 3 high quality heat sinks of aluminium and copper with model number G-RPI-4-3-2-P-1-C. It is suitable for Raspberry Pi 4/3/2 and variants. It helps to keep the Raspberry Pi cool, protect it from overheating. All the heat sinks come with thermal conductive tape. These heat ..
Aluminium Heat Sink Set For Raspberry Pi 4/3/2 - G-RPI-4-3-2-P-4-W
This kit contains a set of 4 aluminium heat sinks with model number G-RPI-4-3-2-P-4-W. It is suitable for Raspberry Pi 4/3/2 and variants. It helps to keep the Raspberry Pi cool, protect it from overheating. All the heat sinks come with thermal conductive tape. These heat sinks can be used with othe..
Black Aluminium Heat Sink Set for Raspberry Pi 4/3/2 - G-RPI-4-3-2-P-3-B
This kit contains a set of 3 high quality anodized aluminium heat sinks with model number G-RPI-4-3-2-P-3-B. It is suitable for Raspberry Pi 4/3/2 and variants. It helps to keep the Raspberry Pi cool, protect it from overheating. All the heat sinks come with thermal conductive tape. These heat sinks..
Copper Heat Sink For Raspberry Pi 4/3/zero - Heavy Duty - G-RPI-4-3-0-P-1-C
This heavy-duty copper heat sink with model number G-RPI-4-3-0-P-1-C is suitable for Raspberry Pi 4/3/zero. The heat sink is of size 12x12x5mm and weighs 5 grams. It helps to keep the Raspberry Pi cool, protect it from overheating. This copper heat sinks comes with thermal conductive tape. Specif..
Official Raspberry Pi 5 Active Cooler - G-RPI-5-P-1
Description: This is an official original cooler for Raspberry Pi 5 SBC. It has to be used with Raspberry Pi 5 without a casing when it is operating at a high sustained load. It uses the same fan connector for power and control. It integrates a large metal heat sink with variable-speed blower. It..